Torch brand fitment
Fronius TIG Torch Compatibility
Fronius — handle OD range: Varies — most production Fronius TIG handles fall in the medium to large range.
About Fronius TIG torches
Fronius TIG torches come standard on European and aerospace shop floors. The TTG and TTW series share a common handle geometry across most variants. Fronius torches typically ship with an integrated thumb switch on the OEM cable, but welders who want a remote SW-1F or ETSW-1 to retrofit can use the Button Clip GTAW to mount it cleanly.
Common series we cover
TTG 1600TTG 2200TTW 2500TTW 3000
Recommended Button Clip GTAW size
Medium for TTG 1600 / 2200 air-cooled; Large for TTW water-cooled (verify with size guide)
Fronius water-cooled torches are heavier and stiffer — the Large Button Clip GTAW provides the strongest grip on these handles.
If your specific Froniustorch isn't listed here by name, measure the outer diameter of the handle just behind the cup with calipers and match that measurement against the size guide.
Confirmed switch compatibility
The Button Clip GTAW pairs with any of the standard remote HF start momentary switches a Fronius torch will accept:
- SW-1F flat momentary switch — Radnor / Miller-Weldcraft
- SW-1 bulb switch — American Torch Tip / Linde
- ETSW-1 momentary switch — EWS Pro / Everlast
OEM reference
Manufacturer torch line: www.fronius.com.
Buy the Button Clip GTAW
Confirmed fit on standard Fronius TIG torch handles. Pick your size on the product page.