Torch brand fitment
Miller TIG Torch Compatibility
Miller / Weldcraft — handle OD range: 0.55" – 0.83" depending on torch series.
About Miller / Weldcraft TIG torches
Miller TIG torches (Weldcraft is Miller's torch brand) cover the standard Series 9 / 17 / 26 air-cooled lineup plus the proprietary A-series. Most production-shop welders run a WP-17 (medium) or WP-26 (large). The Button Clip GTAW is sized to match standard handle ODs across all three.
Common series we cover
Weldcraft WP-9Weldcraft WP-17Weldcraft WP-26A-150A-200A-250
Recommended Button Clip GTAW size
Small clip for WP-9, Medium clip for WP-17 / A-150 / A-200, Large clip for WP-26 / A-250
If you're running a Miller machine but a third-party torch (CK Worldwide, Furick, etc.), use the torch's measured handle OD against the size guide rather than the brand chart.
If your specific Miller / Weldcrafttorch isn't listed here by name, measure the outer diameter of the handle just behind the cup with calipers and match that measurement against the size guide.
Confirmed switch compatibility
The Button Clip GTAW pairs with any of the standard remote HF start momentary switches a Miller / Weldcraft torch will accept:
- SW-1F flat momentary switch — Radnor / Miller-Weldcraft
- SW-1 bulb switch — American Torch Tip / Linde
- ETSW-1 momentary switch — EWS Pro / Everlast
OEM reference
Manufacturer torch line: www.millerwelds.com.
Buy the Button Clip GTAW
Confirmed fit on standard Miller / Weldcraft TIG torch handles. Pick your size on the product page.